Syma X11 Review

The Syma X11 is another great looking quadcopter, just waiting to join your stable. It’s a high quality, well-mannered quad suitable for both beginners and advanced pilots. The quad’s range is a bit more than 30 meters / 100 feet, and it can cope with a bit of wind too, so it’s great for outdoor flying. Indoor flying is a possibility too. If you are a total newbie using a large room is a great idea. The quad can do flips too, which is a plus, and comes with the usual set of replacement props and crash guard in the box.The only extra you need to start flying is 4xAA batteries for the transmitter.

The Syma X11 is a very stable flyer, so it’s a perfect fit for beginners. It has a 6 axis stabilization system, and gear driven propellers – both features help it’s stability.

It comes with prop guards and replacement props so you surely will not need a repair kit right away, however it’s good to know that a lot of parts are available online, for example spare batteries with charger, motor replacement kit, motors only, etc… With such a high number of available parts it’s one of the best supported quads in the market.

The quad is a great lifter too – it can lift up to 10 grams, probably more.Payload can be whatever you wish for – from keychain cameras to Lego mini-men – just make sure they have a helmet on πŸ™‚

Being a competitively priced quad the Syma X11 does not have a GPS so it can’t return home automatically. Automatic landing isn’t supported either, however it’s so easy to control that it’s not even necessary.

The quad is 15.2*15.2*3.7cm in size, and weighs 35.5 grams so it’s pretty small. Due to being gear driven the Syma X11 is a bit louder than it’s similarly sized counterparts. The shipping size is 14.2 x 7.9 x 3.6 inches,which is good to know if you want to box it back up for travel.

The quad has “high” and “low” modes, suitable for advanced and beginner pilots respectively. High mode is good for outdoor flying as it’s easier to counteract the wind.

The Syma X11 is way bellow the registration weight threshold, so it’s one less thing to worry about.

Video is not supported

by this version, however there is aversion with a built-in camera.

The battery

is a 200mAh lipo one, which grants a 5 to 8minute flight time to the Syma X11.The charge time is around an hour -sometimes a bit more, sometimes a bit less.

The stock charger is USB based so you will need an USB port for charging.The battery uses the JST connector standard, so replacement chargers are easy to find. Replacement batteries are available too, even with charger,for example here. Up rated batteries are available too, for example this 400 mAhset. Larger batteries can give you a longer flight time, so it’s worth considering.

The transmitter

uses the 2.4 Ghz standard which is interference-free, so you will be able to fly your quads together without any problems. You can pair the quad to other transmitters too, which may even extend the range.

Mode switching is possible, so you can use this quad in either mode 1 or mode 2. To switch modes just turn off the Tx, press the rightmost trim button, and turn on the Tx again.

The binding process is easy:

  • First turn on the quad and place it on an even surface.
  • Next turn on the transmitter with the throttle set to the minimum.
  • Push the throttle up to the max and down to the minimum again.
  • The quad and the Tx bind automatically,

Range is around 30-40 meters, which is great for outdoor flying.

Overall

it’s a great quad, and a looker too.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜…


If you prefer larger quadcopters, the Syma X5C and X5SC are good choices. RCGroups has a nice thread on the X11too.

Holy Stone F181 Review

The Holy Stone F181 is a high quality quadcopter with a menacing look,ready to take over your spare time. The quad is nicely designed and well built, it has lots of fans already. Despite being built in China it’s one of those great looking and very durable quadcopters.

The quadrotor can do flips and rolls on a push of a button, so get ready to impress your friends! The range is 50 to 100 meters depending on the conditions, and the flight is very stable, thanks to it’s 6 axis gyro system. Hovering in place is no problem for the quad either, even though it has no GPS. The quad has no artificial height limitation, so it can fly upwards as long as it does not lose contact. If the Holy Stone F181 goes out of range it simply shuts down, so be careful when testing the range. Indoor flying is a possibility too, so rainy days are no problem with this quadcopter.

The Holy Stone F181 quadcopter comes complete with prop guards and legs,which make flying risk-free, and landing a breeze.

Spare parts are available for the F181, for example Amazon has spare batteries, spare motors, and replacement props, skids and prop guards too.

The Holy Stone F181 weighs around 138 grams with everything on, so it’s way below the FAA’s registration limit, which is a plus. Size is 30cm X 30cm.It can lift around 10 grams with the default configuration, and 35 grams when the legs, prop guards and the camera is removed, though it will surely break a sweat. To put this into perspective, lifting small plastic toys, or another keychain-style camera is no problem for this quadcopter, lifting a GoPRO is out of question.

The wind resistance of the Holy Stone F181 is fairly good – you can fly in winds up to 15 kmh (10 mph), or even more if you are an advanced pilot. For windy days removing the guards, legs and camera can help as it will reduce the drag, however your quadcopter will be more susceptible to crashing than usual due to the wind, so be careful.

The box comes with everything you need for flying, except for the 4xAAbatteries for the transmitter.

Suggested age for the Holy Stone F181 is 14 years and up; the quadcopter contains small parts, so keep it out of the reach of little children.

The F181 has multiple modes for beginner to advanced pilots, and features a headless mode too which helps a lot when you are a bit lost. (Headless mode means that the quadcopter will remember it’s initial orientation, and the forward/backward/left/right sticks will work with the initial orientation,not the quad’s actual orientation).

The F181 is not fast, and turning radius is a bit large too – on the upside the videos are steady compared to the competition.

The quadcopter has limited return home functionality, it will fly in the opposite direction it was first flown on the press of a button. Automatic landing is not supported, however it’s really easy to land this quad.

The F181 supports gyro sensitivity setting, pressing the top left button will cycle you through the four modes: 25% (1 beep), 50% (2 beeps), 75% (3beeps), 100% (4 beeps).

The shipping size is around 40x50x10 cm, shipping weight is 1.7 pounds. The suggested age by the manufacturer is 14 years and up. The quadcopter has small parts,so make sure little children can’t reach it.

The F181 comes with really bright LEDs which make night flying a breeze.Even better, the LEDs can be controlled from the transmitter, so you can turn them off to fly a little longer.

The F181’s drive train is geared, which makes it easier for the motors to spin up the props.

The transmitter

is very ergonomic, and fits the hands nicely. It uses the standard 2.4Ghz technology, which is interference-free, so you will be able to fly with your friends and others together. The transmitter is mode 2.

The quadcopter and the transmitter bind automatically, all you have to do is switch the quadcopter on, set throttle to the minimum, then turn the transmitter on and push the throttle to the maximum and back to the minimum again. You will hear a beep after this, and the quad’s lights will turn solid.

The battery

is a 3.7 volt Li-Po one, with a charge time of80 to 100 minutes, and a flying time of 7 to 9 minutes. The battery capacity is 750mAh, upgraded batteries are available. The Holy Stone F181 comes with two batteries, which is a nice extra from the manufacturer.

Charging is via the USB based charger, just plug it into an USB port (iPhone charger is good for this) and wait for the LEDs to turn solid or green. The quadcopter comes with two chargers, so you can charge both batteries before heading out to fly.

The batteries use a JST plug, so they are compatible with a wide range of chargers.

The onboard video

has a 1280 X 720 pixel resolution, the frame rate is 30 frames per second. You can start the recording by pressing a button on the transmitter. Taking photos is just as easy too. The quad is non-fpv,so you will not need a smartphone nor does the transmitter have a holder fora smartphone.

The videos are save in an MJPEG format, the file extension is .AVI. As such any player can play the F181’s videos. Videos are recorded to the MicroSD card in the camera, and the F181 comes with a 2GB MicroSD card, and an USBcard reader, so you have everything for recording right out of the box.
Audio is recorded too, however the prop and wind noise is pretty strong.

The video and photo quality is good, as the F181 was designed for aerial photography the recordings are stable compared to other quadrotors.

The camera is fixed in place by two hook-arms, and it’s fairly easy to remove and reattach. You can adjust the camera a little bit upwards and downwards, but no sideways rotation is possible.

The camera status (recording or not) is displayed on the LCD screen of the transmitter.

It’s important to stop the recording before powering off the F181, or the video files could get damaged.

Our rating:

The Holy Stone F181 is great quadcopter, especially for aerial photography.
Fun:β˜…β˜…β˜…β˜…β˜†
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜…

Resources

Modsynergy has a detailed review of the Holy Stone F181. The manual for the Holy Stone F series quadcopters is available online on Slideshare.You may also like the Holy Stone F180C (this is a bit smaller) or the Syma X5C (this one is a bit larger).

Quadpro Nc5 Nano Quadcopter Review

The Quadpro Nc5 Nano is a nano sized, 4.5 x 4.5 centimeter nano quadcopter, weighing only 13 grams. The quad is well built, it’s available in black with prop guards, and in white without prop guards in a heart-shaped box. The Nc5 Nano is suitable for indoor and outdoor flying too, has LED lights to ease the orientation and night flying,and can do flips on button press.

The Nc5 Nano has a 6 axis stabilization system (3 axis for the gyros and 3axis for the accelerometers), so it’s very stable in the air.

Transmitter trimming and gyro recalibration is supported to fix any stability issues (though this is only needed after hard crashes).

With the prop guards on the Nc5 Nano can take most crashes without any damage. Replacement props are included in the package, so you’ll be able to keep flying even if a prop gets damaged. The props are properly marked, so replacing them is easy.

Unfortunately there aren’t many parts available for this quadcopter, generic propeller replacement kits, like this one for mini quadcopters might work.

The Nc5 is very tiny, so it can’t lift anything substantial. For best results fly outdoors only in calm weather.

The range is 30 to 50 meters, and as the Nc5 uses the 2.4 Ghz technology, it will simply drop out of the air once it goes out of range.

The suggested age according to the manufacturer is 8 years and up, in reality it’s probably 14 years and up. The Nc5 contains small parts, so keep it out of the reach of little children.

The Nc5 Nano supports headless mode, and has sensitivty two settings for beginner and advanced pilots. To toggle the sensitivity, just push the button on the top left of the transmitter. One beep stands for beginner mode, two beeps for advanced mode.

The Nc5 Nano uses brushed motors, which are adequate for such a small quadcopter.

The box dimensions are around 4 x 4 x 6 inches, the shipping weight is 270grams. The box contains everything for flying, except for the transmitter’s batteries (2xAA). As the Nc5 Nano itself is very small, FAA registration is not required.

The Nc5 Nano’s battery

is a 3.7 Volt, 100mAh LiPo battery which grants the Nc5 Nano a 5 minute flight time after 20 minutes of charging. The 20 minute charge time is exceptionally good for such a quadcopter.

Charging is done using the USB charger provided with the quadcopter.Charging is complete when the charger’s LED turns solid. The USB charger is compatible with most USB sockets, including the iPhone charger.

The Nc5 Nano’s plug is similar to other mini quadcopter’s so chargers for other quadcopters could work with it, for example this Cheerson CX-10charger. However there is no designated replacement charger for theNc5 Nano.

The Nc5 Nano has low voltage cutoff, it’s LEDs will start blinking before the battery runs out.

The Nc5 Nano’s battery is not removable, which is usual for these tiny quads.

The Nc5 Nano’s transmitter

is tiny, and is best fit for small hands, which is usual with such small quadcopters. For a nano quadcopter with a right-sized transmitter, check out the Syma X12

The Nc5 Nano uses the 2.4 Ghz technology, which is interference free. The transmitter is mode 2, and is fixed.

The Nc5 Nano and the transmitter auto bind, all you have to do is power on the quadcopter first, then the transmitter.

The range is 30 to 50 meters, depending on the environment – more than enough for such a quadcopter.

Overall

the Quadpro Nc5 Nano is nice little quadcopter,however there are almost no parts available for it. For a better supported nano quad, you may want to check out the CheersonCX-10. Then again nano quadcopters are toys, and it’s hard to go wrong with anyone of them.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜†β˜†
Looks:β˜…β˜…β˜…β˜…β˜…

Resources:

For a nano quad with a proper transmitter check out the Syma X12.

 

Holy Stone HS110W FPV Drone Review

The Holy Stone HS110W is a high quality FPV quadcopter from Holy Stone, which has more extras than you could think of. The HS110W is available in black and green. The quadcopter has the standard 6 axis gyro stabilization, LEDs for easier orientation, on board camera, headless mode, air-pressure based altitude hold, automatic takeoff and landing, one-button flips, and it can be controlled from a smartphone too.

The Holy Stone HS110W not only looks good, but is well built too. It can take crashes like a champ as tiny screws hold it together, not the usual plastic clips. Still for best results fly only above soft surfaces.

It has legs for smooth landing, and prop guards to protect the props would the quadrotor crash.

The drone comes complete with replacement props. Replacement batteries with charger and replacement motors are available too.

Other parts (props, guards, legs) seem to be out of stock now.

The Holy Stone HS110W is very stable in the air – you can just put the transmitter aside and it will stay planted, which is a unique feature in this price category.

The mini drone is 32 centimeters x 32 centimeters in size, and weighs a bit more than 100 grams. As such it can’t lift much weight, but will happily lift a 808 keychain camera if you lighten up things a bit. FAA registration is not required for drones this light.

The quadcopter supports both indoor and outdoor flying, and has 4sensitivity modes which not only helps with adapting the quadcopter to beginner and expert pilots, but makes indoor and outdoor modes possible too.Low (beginner) modes are better for indoor flying, while high (expert) modes are better for outdoor flying.

Still, the HS110W really shines outdoors due to its size, power and range.It can fly up to a 100 meters away, and can fly just as high too.

The mini drone’s propellers are gear driven, the motors are the brushed coreless type – standard for every quadcopter in this class. The HS110W is fairly quiet, so you will not disturb anyone with it.

The range for the transmitter is 100 to 120 meters, while the video range is about 30 to 50 meters. As the mini-drone uses the 2.4 Ghz spread-spectrum technology, it will simply shut down if it goes out of range.

The suggested age for the quadcopter is 14 years and up. The kit contains tiny parts, so keep it out of the reach of little children.

The HS110W has a wide range of features including headless mode and one key return: in headless mode the forward-backward-left-right stick movements will be interpreted with respect to the quadcopter’s power-on orientation.
So if you powered on the quadcopter while it was looking forwards away from you, using the back stick will bring it back to you in headless mode.

The quad also has one-key landing and liftoff, which is a nice convenience feature. It features altitude hold too, so it will stay planted in the air.

The box contains everything for flying, except for the 4xAA batteries for the transmitter. A smartphone is required only for the camera functions -you can fly without it, but will not be able to record videos or take photos. The package size is 45 cm X 28 cm X 10 cm.

The battery

is a 3.7 Volt, 650mAh LiPo battery, built into the quadcopter.

The charge time is 60 minutes, flight time is 7 to 9 minutes. With a replacement battery and charger or a USB power bank you can get even more fun out of this quadcopter.

The stock charger is USB based, and connects directly to the quadcopter.It’s easy to charge the HS110W: just plug the quadcopter into the charger,and the charger into a USB socket. It’s compatible with iPhone chargers too.

The quadrotor has low voltage protection, it’s LEDs will start flashing if the battery is running low. Land as soon as possible if you see this.

The video

of the HS110W is a 1280×720 pixel unit. It can record videos and take photos both to the internal 4GB MicroSD card(included in the package), and it can send the video signal via WiFi to a smartphone. The video quality is average, and the WiFi based FPV has a distinct lag, so all in all it’s a fairly standard quadcopter camera.

Using a smartphone for the video functionality is great because you can actually see what you are recording. The package includes a smartphone clip too, which attaches to the transmitter’s antenna.

The videos are recorded as plain .AVI files so all players can play it. For best results always stop the recording before powering off the quadcopter, or the files could get damaged.

The camera is fixed in place, and looks forward, so adjusting it is not possible.

While the smartphone app can in theory control the quadcopter, in reality it does not work so well. So use the transmitter to control the quadcopter, and the smartphone to control the video functionality. The app supports live viewing, taking photos and starting/stopping video recording.

The quadcopter supports both Android smartphones and iPhones. To use the video functionality first download the android app from Google Play, or the iOS app from iTunes.

Next start the quadcopter and bind it to the transmitter. Search for a WiFi hotspot with FPV in the name, and connect to it. Next start the smartphone app. The app has buttons for taking photos and starting/stopping the video.

For the smartphone-based recording to work, the smartphone has to stay on WiFi, which has a 30 to 50 meters range. Cellular data is not suitable for this purpose. Replacement camera exactly for this quadcopter is not available, however a wide range of WiFi FPV cameras are available on Amazon.

The transmitter

is a full sized unit, with a great looking LED-backlit LCD. It uses the interference-free 2.4Ghz technology, so you can fly together with other quadcopters without any issues. Just make sure you bind the quadcopters and the transmitters one-by-one.

The transmitter is mode 2 only, with the throttle stick on the left.

Binding the quadcopter and the transmitter is simple, all you have to do is turn both off, and set the throttle to the minimum. Next turn on the quadcopter, then the transmitter, and push the throttle up to the maximum and down to the minimum again.

The transmitter has a button for gyro recalibration, so if the quad is drifting (happens after a crash), just place it on a level surface and press the calibration button.

Takeoff and landing are supported by their appropriate buttons.

Overall

the Holy Stone HS110W is one of the best quadcopters in it’s class – it has a wide range of functions, flies really well, and looks good too. 6 stars if that would be possible.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜…

Resources:

If you liked the Holy Stone HS110W you will probably like the Akaso X5C and the Syma X5SW too. There is a nice review of the HS110W over at Youtube, and the Amazon Reviewsare very helpful.

Ionic 6 Axis Mini Quadcopter Review

The Ionic 6 Axis Mini Quadcopter is a tiny but tough quadcopter from Ionic. It has everything you can expect from such a tiny drone: it has prop guards out of the box, bright LED lights, a 6-axisstabilization system and can do flips on button press.
The Ionic mini-quadcopter is available in three colors: orange, green and white.
Range is around 30 meters, and flight time is around 6 to 8 minutes, which are respectable. The mini-quad uses the 2.4 Ghz technology, so it will simply drop out of the sky if it goes out of range.

The box contains everything for flying, except for the 2xAA batteries for the transmitter.

The Ionic mini quadcopter weighs only 15 grams and is about 7.5 x 7.5centimeters in size. Still it’s suitable for both indoor and outdoor flying,and will take small gusts like a champ. FAA registration is not required for the Ionic mini quadcopter, which is a plus.

The quadrotor is very stable in the air, so you will not have to keep adjusting it. The transmitter has trim buttons which can come handy would the quad start drifting.

The mini quad comes with 4 replacement propellers, however parts are a bit harder to find than for the Cheerson CX-10 for example.

Being a tiny quad it will not be able to lift anything substantial.

The Ionic 6-axis mini quad has beginner and expert modes, which make indoor and outdoor flying easier too – beginner mode is better for closed spaces,while expert mode is better to fight the wind outdoors.

The suggested age group is 14 years and up, however younger children can fly it well too. As the quad contains tiny parts, keep it out of the reach of little children.

As other quadcopters in this size- and price-range, the Ionic mini quadcopter is bare-bones, it does not have a GPS, headless mode, or one key return. For such functions you may want to check bit larger models, like the Holy Stone HS170.

The motors of the Ionic 6-axis mini quadcopter are the brushed coreless type, so they can spin up and down really fast.

The shipping weight is around 200 grams, the box size is 20cm x 15cm x 7cm.

The Ionic mini quadcopter’s bright LED lights make night flying fun. It’s quiet too, so you will not wake the neighbors with it.

The battery

of the Ionic 6-axis mini-quadcopter is a single-cell 3.7 volt Li-Po battery, with 150mAh capacity, which is not removable.
The battery grants the Ionic mini quad a 6 to 8 minute flight time after a100 minute charge time.
The datasheet states that the battery is a 500mAh unit, however this isnot the case – you could not even fit such a large battery into the quadcopter.

The charger is an USB based charger. To charge the quadcopter, first connectthe quadcopter to the charger, next the charger to an USB port. Wait for thered LED in the charger to turn on, and you are ready to go.

The quad has low-voltage protection, and it’s LEDs will start blinking once it’s battery is running low. If you see this, land as soon as possible to avoid crashing it.

Charging the battery is possible using any USB socket, including the iPhone or Android chargers, or USB power banks.

While official replacement chargers are not available, other mini chargers like this one for the Syma X12 or this for the JJRC H20 could work. Then again it could be easier to just get a Syma X12 which is better supported.

The transmitter

of the Ionic 6-axis is a game controller-like small sized transmitter. As such it’s a bit more suited to small hands.

The mini-quadcopter uses the 2.4 Ghz technology, which is interference free.This means that you will be able to fly together with others. Also the colors of the mini-quad do not code it’s frequency, they all run on 2.4Ghz.The transmitter is part of the package, and is needed to control the quadcopter – you can’t control it from a smartphone.

The range of the transmitter is 30 meters. Would you go out of range the quadcopter will shut down and crash, so take care. Fly only above soft surfaces if you want to find the limit.

The quadcopter is not available without a transmitter, and it will not bind to other transmitters either.

The transmitter is fixed in mode 2, with the throttle on the left stick.

To bind the quadcopter and the transmitter, first turn them off, place the quadcopter on an even surface, and set the throttle to minimum.
Next turn on the quadcopter, then the transmitter, and push the throttle to the maximum, and then back to the minimum again.

To enter the flip mode depress the right stick. Pushing the right stick again will stop the flip mode. In flip mode the mini quadcopter will flip towards the direction of the right stick.

Depressing the left stick switches between low (beginner) and high (advanced)mode.

If you trimmed the transmitter, but would like to reset it, all you have to do is press the “R” and “B” trim buttons together.

Overall

the Ionic 6-axis mini quad looks good, flies well,however the support is a bit lacking. But hey, it’s just a toy, so you can’t really go wrong with it.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜†β˜†
Looks:β˜…β˜…β˜…β˜…β˜…

Other tiny quadcopters you may like:

The Cheerson CX-10 and the Estes 4606 are booth very good nano-quadcopters, the Cheerson CX-10is very well supported too.

Blade Nano Qx Quadcopter Review

The Blade Nano Qx is an absolutely tiny quadcopter weighing only 16 grams.It is great for indoor flight, and can tolerate small (10-20 mph) winds outdoors too. It’s high quality and very robust, it has crash- and prop guards for protection, and being light means it can’t crash hard.

The Qx has two version, this is the non-FPV one. So this is a simple quad,without special needs as a smartphone for the video functions.

Being very small (only 5.5 x 5.5 x 1.97 inches) this quad is a really quiet!

Even though being small, the Blade Nano Qx has a very respectable 7 minute flight time and a 25 minute charge time and comes with a single battery. To extend the fun you can buy additional batteries, for example on Amazon.

Charging

The Blade Nano Qx has a simple USB based charger, the battery pops right into it. As such it does not have a charging cable, and you will need an USB outlet or a computer to charge it. Replacement chargers are available,for example the one in the picture.

The charger supports only a single battery, but you can easily get multiple chargers.

Charging is super easy: just plug the charger into an USB port, pop in the battery, and wait ~25 minutes for the red LED to turn off.

Flying

During flight if your battery is getting low, the led will start blinking. You should land as soon as possible to avoid damage to your quad.

The Blade Nano Qx has both an agility and a stability mode; these two modes take the place of gyro sensitivity setting.
Stability mode is better for beginners while agility mode is better for advanced fliers.
In agility mode this can even do flips!

As the Blade Nano Qx is an an entry level quadcopter it does not have a GPS for position hold or return home function (it would not work indoors anyway), but stays planted in the air thanks to it’s powerful sensors. The quad is powered by brushed motors,which is the standard solutions for these small machines. Replacement motors are available both in clockwise and counter-clockwise variants.Upgrades are available too, for a more aggressive flight you can get faster motors complete with wiring and plugs (just make sure you exchange them one by one, so you do not mix up the motor’s directions). To increase the flight time you can upgrade the battery too. Be careful though, the motor upgrade will turn your Blade Nano Qx into a hard-to-control speed demon.

The transmitter

needs 4xAA batteries which are not always included in thepackage. You can use it in both mode 1 and mode 2. As the Blade Nano uses2.4 ghz transmitter technology, it is compatible with other Txes too.Changing the Tx is a good idea to extend the default 60 feet range. Forgroup flying the 2.4 Ghz technology guarantees that you will not getinterference, so they make a great gift for friends.

Transmitter binding

The transmitter and the quadcopter are bound together at the factory. You can bind it to another transmitter using this procedure:

  • disconnect the flight battery from the quadcopter.
  • select an empty model memory on your transmitter if multiple models are supported.
  • select acro or airplane mode on your transmitter if supported
  • clear servo reversing, trims, set throttle to low/off and power off the transmitter.
  • connect the quad’s battery. Wait ~ 5 seconds for the blue LED to flash.
  • start the transmitter in bind mode
  • the quad is bound when the blue led turns solid.
  • disconnect the flight battery and turn off the transmitter
Good to know:

 

  • Quadcopters this small do not need to be registered.
  • If you suffer a crash, replacement parts are readily available for example here.
  • The suggested age is 14 years and above.
  • The quad comes without LEDs, which might impact night flying.
  • The quad is not water proof so stay away from ponds or the bathtub πŸ™‚
  • The shipping dimensions are 14.1 x 8.4 x 4.5 inches , 1.2 pounds – handy to know if you plan to travel with it.
Our Rating:

Due to the quad’s agility, fun factor and overall value it deserves the highest rating.You might want to check the rating on Amazon too for more information.
Fun factor:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜…β˜…

Similar small quadcopters you may like:

Syma X8C Venture Review

The Syma X8C Venture is a large sized quadcopter, weighing in at a bit more than 600 grams. Not only the weight, but the size is impressive too, the quadcopters measures 50 x 50 x 15 centimeters with the prop guards on. Motor-to-motor size is around 30 x 30 centimeters. The X8Ccomes with everything needed for flying, except for the 4xAA batteries for the transmitter.

Due to it’s large size the X8C Venture is very stable, only strong winds will disturb it, so it’s suitable for beginner pilots too. The brushed motors provide adequate power, and the transmitter has low and high rates (that is, beginner and advanced modes), which makes the X8Ceven more adaptable.

The overall quality is really high, even though it may not be visible at the first glance.

The X8C can even do flips, and is great for aerial photography due to it’s stability. Yaw rate is a bit low, but this problem is inherent to the quadrotor design – tricopters with a servo-controlled tail have a much better yaw rate.

The range of the X8C Venture is up to 250 meters, there is no limit on how high can it fly, so it will go up and up until it gets out of range. As theX8C uses the 2.4Ghz transmitter technology it will simply shut down once it’s out of range, so be careful with it.

The X8C is very durable, and comes with prop guards and legs out of the box. Still, a 600 gram quad is no toy, and can crash pretty hard so take care.The prop guards are a bit brittle, it can be a good idea to stock up on them.

Replacement parts are readily available, for example legs and prop guards, motors and complete sets are available too.

Being a large quadcopter it can lift considerable weight, so lifting a GoPRO is a possibility provided you can fit it.For best results remove everything you do not need: the prop guards and the original camera.

The transmitter does not support additional servos, so you will not be able to move/rotate the extra camera around.

The quadcopter can fly both indoors and outdoors, however indoor flight is very limited due to it’s size. On the other hand it really shines outdoors, and will fly well even in moderate wind.

The X8C venture has LEDs, which make the night flight real fun, and help a bit with daytime orientation too.

The suggested age group for the X8C is 14 years and up. The X8C contains small parts, so keep it out of the reach of small children.

The Syma X8C venture has headless mode, which comes really handy if you lost the orientation of the quadcopter. In headless mode (which can be activated by pressing the top left button on the transmitter for two seconds) theX8C’s controls will change: the forwards-backwards-left-right directions will be interpreted with respect to the X8C’s original direction, so sending the quad backwards will simply make it fly back to you. Return home is not supported.

The X8C has “low” and “high” rates, suitable for beginner and advanced pilots respectively. The modes can be toggled by a short press on the top left button of the transmitter.

The shipping weight is 1.8 kilograms, and the size is around 35x35x17centimeters.

Even though the X8C is large it is surprisingly quiet. The large weight means that this quadcopter must be registered with the FAA. Online registration is possible here.

The X8C’s battery

is a 7.4 V 2000 mAh Li-Po battery, which grants the X8C a 7 to 12 minute flight time depending on how you fly it,after a 200 minute charge time. The charge time might seem to be long, the upside is that the battery will not be strained by too fast charging.
The X8C comes with a single battery.

The charger is a balancing charger, and uses a standard wall socket to charge the 2 cells of the battery. The battery uses a banana plug to connect to the X8C, and a 3-wire balancing plug to connect to the charger. While they may seem special, replacement is readily available, for example a3 battery + charger combo with the possibility to charge all the three batteries at once.
Buying multiple batteries is a great way to increase your flight time.

The stock charger has two LEDs, a yellow one for the input voltage, and a green one for the charging.
When the green LED turns of the battery is fully charged.

The X8C has low voltage cutoff, it’s LEDs will start blinking before the battery power runs out.

The X8C’s camera

is the same as the X5C’s. It’s a 2 megapixel camera, with an1280x720 resolution, frame rate of the videos is 30 fps.
The videos are recorded onto the 4GB MicroSD card which comes with the quadcopter. A card reader is part of the package too.
The MicroSD card is inserted into the back of the camera.

The camera is not fixed, but is tilt-able in 30 degree increments, which is a bit better than what the average quadrotors offer.

Recording and photo taking is controlled on the transmitter, so you will be able to stop and start it mid-flight, no more fiddling on the quadrotor.
To start and stop the video, push the button right of the left stick down.To take a photo push it up.

It’s important to stop the recording before powering off the quadcopter,otherwise the files could get damaged.

The video files are stored in .AVI format, so pretty much any video player will play it. Audio is recorded too, however it can be too noisy to be useful.

As the X8C is not an FPV quadcopter, a smartphone is not required for the flying, and there is no live video feed.

The X8C is fairly strong, and once you remove the original camera it can easily lift a GoPRO or one of it’s clones.

The photo and video quality is as good as you can expect from 2 megapixels.

For an advanced setup you may want to check out this gimbalor this vibration damper(needs fitting for the X8C).

The X8C’s transmitter

is a lightweight, 2.4 Ghz unit which looks like the professional transmitters, except for the white color. It’s interference-free, so you will be able to fly with others together. The X8Cis available as a minimal package too, without charger, transmitter and camera here.

Even though the X8C uses the 2.4Ghz frequency, the protocol is proprietary,so in general you will not be able to bind it to other transmitters.
One exception is the DeviationFirmware, available for the Walkera Devo transmitters, which could work, but requires tinkering with the transmitter.

The stock transmitter supports only mode 2 and mode 4. Mode 1 is notsupported.

The X8C and the transmitter bind automatically, you only have to followΒ  these steps:

  • Turn off both the quadcopter and the transmitter.
  • Power on the quadcopter.
  • Push the throttle (left stick) to the minimum and power on the transmitter.
  • Next push the throttle up to the maximum, then down to the minimum again.
  • The quadrotor and the transmitter are now bound.

To recalibrate the gyros, place the X8C on an even surface, and push both sticks to the lower right corner. Once the X8C’s LEDs start flashing, recalibration is complete.

Our rating:

The X8C is great platform for aerial photography, feels planted in the air. The only downside is that it’s not as sporty as it could be.
Fun:β˜…β˜…β˜…β˜…β˜†
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜…

Resources:

RCGroups has even more details on the X8C here and here. Plans for a 3D-printed Gopro mount is available here, the manual is hereand there is a brushless upgrade kit too.

Syma has other quadcopters for aerial photography, for example the X5C and the X5SC. If you are looking for something more sporty, you the Holy Stone F180Ccould be your friend.

Akaso X5C Review

The Akaso X5C is great looking value quadcopter,with all the features you can expect from a quad in it’s size and price range: it is 6-axis stabilized, has a transmitter-controlled camera,headless mode, and will do flips on button-press.

While the Akaso K5C is a clone of the Syma X5C it has some differences. As with the Syma X5C the build quality is high, the quadcopter has legs and prop guards for protection, and the box comes complete with a pair of replacement propellers. For the video functionality the box also includes an MicroSD-Card and a USB card reader.

The X5C is well stabilized, and you will not have to work the sticks just to make it stay planted. The control range is 50 to 100 meters, depending on the charge level, and environmental conditions. Just as other quadcopters which use the 2.4 Ghz technology the X5C will simply drop out of the sky if it gets out of range.

The X5C can fly as high as it’s range permits – then again be careful when pushing the limits.

Replacement batteries and chargers are available, however other parts can be a bit hard to find. The Syma X5C part set is probably compatible, however it was not tested.

The Akaso X5C can lift quite a few grams, however it will not be able to lift a GoPro even if you remove the camera, landing skids and the prop guards.

The quadcopter supports both indoor and outdoor flying, and has three speed modes for beginner, intermediate and advanced pilots. The beginner mode is particularly suitable for indoor flight. The quad’s bright LED lights make night flying fun, and help the orientation too.

The K5C’s wind tolerance is a good, it’s even better than the Syma X5C’s, as it does not have the Syma wind bug.

The suggested age group is 8 years and up. The quadrotor has small parts, so keep it out of the reach of small children.

The quadcopter is a basic unit, so it does not have GPS or automatic take off and landing. It does have headless mode, which means that the left-right-forward-backward stick will interpreted with respect to the quadcopter’s takeoff direction. So using the back stick will bring the quadcopter towards you.

The propellers are gear-driven which cuts the costs, the motors are the coreless brushed type known for their high acceleration, so the X5C is fairly nimble in the air. Even though the X5C is geared it does not make much noise.

The size of the X5C is 31.5 x 31.5 centimeters and the weight is around a100 grams (so it does not need FAA registration). The packages weight is 2.5pounds.
The box contains everything you need for flying, except for the 4xAAbatteries for the transmitter. Even bundles are available with extra batteries for the quad and extra charger.

The camera

is an average-quality item, it can take photos at an 1280×1024 pixel resolution (1 megapixel), and record videos at 640×480 pixel resolution (0.3 megapixels). The video frame rate is 30 fps, the video format is simple AVI, so all players can play it. The camera does not have night vision.

The camera functionality can be controlled from the transmitter, which has buttons for taking photos, and to start/stop recording. The red LED will keep flashing while the camera is recording, so it’s really easy to see ifit works.
The videos and photos get recorded onto the MicroSD card in the camera,which is included in the package. To view them you will have to remove the card and use the supplied USB card reader.
For best results always stop the video before powering off the quad, or the file could get damaged and will be unplayable.

The X5C does not have a live video feed, so you do not need a smartphone forthe video functionality.

The camera is removable so you can lighten up your quadcopter if you do not want to use it. The camera does not have a servo so you can only look around by turning the quadcopter itself. The camera is angled downwards, so it’s best for ground shots.

The battery

is a single cell, 3.7 volt, 500mAh Li-Po unit.The flight time is quoted as 5 to 7 minutes by the manufacturer, in reality you can expect more than 10 minutes of flying on a single charge. The charge time is about an hour.

Replacement batteries and chargers are available – they are great to extend the flight time and get more out of your quadcopter.
USB power banks can be used for this purpose too.

The charger is USB based and works with any USB socket. To charge the battery remove it from the quadcopter, and connect it to the USB charger.Next connect the charger to an USB socket. Charging is finished when the red LED in the charger turns on.
Fully charge the battery before storing the X5C for long time.

The battery does not use the JST connector which is common with quadcopters,so it’s best to go with the official chargers and batteries.

The transmitter

is a full-sized unit so it fits nicely in the hands.
The transmitter uses the interference-free 2.4 Ghz spread-spectrum technology, so you will be able to fly with others together.

The transmitter has buttons for every function of the quadcopter, including flips, taking photos and starting/stopping the recording.

Binding the quadcopter to a different transmitter is not possible, as the Akaso X5C uses a special protocol.

The transmitter is mode 2, with the throttle on the left stick.

Binding the quadcopter and the transmitter is easy, just follow these steps:

  • Fully charge the battery of the quadcopter.
  • Turn both the quadcopter and the transmitter off, and set the throttle stick to the minimum.
  • Turn on the quadcopter, then the transmitter.
  • Push the throttle up to the maximum, then down to the minimum again.
Overall

the Akaso X5C is a great value quadcopter – it is not as polished as it’s competitors, however it’s price is unbeatable.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜†

Resources:

If you liked the Akaso X5C you will surely love the Syma X5C andX5SC. For live video check out the Syma X5SW.
For more insight on the Akaso X5C check out the reviews on Amazon.

Syma X5SW Review

The Syma X5SW is the FPV variant of the Syma X5line. Thus the X5SW has much in common with the Syma X5 and the X5SC. It’s well built, has prominent legs and prop guards, so it can take crashes too, and overall gives a feeling of a high quality product.

It can do flips and rolls on button press, and has a 6 axis stabilization system, which makes flying very smooth.

The X5SW is suitable both for indoor and outdoor flying, however it really shines when flying outside on a calm day. Wind resistance can be a weak spot of this quadcopter, as some of it suffer from a slight wind bug. The wind bug can be counteracted by applying forward trim by pushing the trim button on the left of the right stick forwards multiple times. Just remember to push it backwards before landing. These steps are not necessary on calm days.

The X5SW also has a WiFi camera which can stream live video to your smartphone, or you can use it to take photos. It’s excellent for recording and aerial photography because you actually know what you are recording. However all WiFi based FPV solutions have a distinct lag, which can make FPV flyingΒ  bit of a challenge.

The X5SW’s range is around 50 meters, and it can fly just as high too. TheX5SW will simply shut down once out of range, so push it only above soft surfaces.

In general the flight is very stable due to the 6 axis stabilization, and the high and low settings make it suitable both for beginner and advanced pilots.

The legs and the prop guards the X5SW comes with make it very sturdy; upgrades and replacement parts are readily available too, for example replacement batteries with charger, upgraded motors, motor + gear set combos, replacement props, legs and guards.
All these available parts make the X5SW one of the best supported quads on the market.

Being a large quadcopter it can lift considerable weight too, particularly if you remove the camera. However a GoPRO is just too much for it.

The X5SW supports headless flight mode, which is very handy if you lose the orientation. The X5SW does not have a GPS.

The suggested age group for the X5SW is 14 years and up. Keep the quadrotor out of the reach of little children, as it contains small parts they could ingest.

The X5SW also has bright LEDs for orientation, green in the back and redLEDs in the front. Besides helping the orientation, the LEDs are used as low voltage indicators too: they will start flashing before the LiPo battery runs out.

The X5SW is 31 x 31 x 10 cm in size, and it’s weight is around 120 grams with the camera on. As such the X5SW does not need FAA registration.

The box size is 41 x 35 x 10 cm and weight is around 1 kilogram. The box contains everything you need for flying except for the 4 x AA batteries for the transmitter (for the video functionality you will need a smartphone).

The low and high settings and the flipping function can be activated by pressing the shoulder buttons of the transmitter.

Even though the X5SW has a geared drive with brushed motors, it’s not noisy.

The X5SW’s video

is a 640 x 480 pixel 0.3 MP unit. The FPV system has a 0.5 second lag – so it’s ideal to try out FPV flying, however you will probably want to move to another solution later.

The X5SW does not record audio. If you need audio you may want to check the Syma X5C.

The X5SW’s FPV supports WiFi capable Android and iPhone smartphones, and transmitter has a cellphone holder for this. The videos are recorded onto the smartphone, you can use a file manager to save them to your computer.Viewing the live video feed on a computer is not supported.

The camera is removable, so you can use the X5SW as a normal quadcopter too.Flight times will be longer this way, due to the reduced drag, weight, and battery usage.

The WiFi range is around 50 meters too, so you will not run out of WiFi range with this quadcopter. The camera is usable without the X5SW, all it needs is a 3.7 volt LiPo battery for power, so you can mount it on other quadcopters or RC vehicles too with a bit of tinkering.

A cellphone app is required for the camera, which is downloadable using the QR code on the box. To start the FPV turn on the camera and connect to the”FPV WIFI_****” WiFi network with your smartphone. Next start the smartphone app. The smartphone app has buttons to record a video, take a photo, or replay previous videos.

If you have issues with the camera try powering up the quad first, and connect the camera only afterwards. The WiFi can have interference issues,so if it’s not working at home it still could work out on the field as there are no other interfering hotspots there.

The smartphone apps are available from Syma, or directly on Google Playand the AppStore.

Handbrake can recode the videos into MP4 or MKV formats.

The X5SW is cannot be controlled from a smartphone, so you will still need the transmitter.

The X5SW’s battery

is a single cell, 3.7 volt, 500 mAh LiPo battery. Flight time is around 5.5 minutes, after a charge time of 2 hours.The charger is USB based, and is compatible with most USB sockets, for example iPhone chargers work well with it too.

Replacement chargers and batteries are available, even huge, 1200 mAh batteries too which can give the X5SW much longer flight times.

The X5SW has low voltage protection, and will signal low battery voltage with flashing LEDs. When you see this land as soon as possible to avoid damage to the quadcopter.

The X5SW’s transmitter

is a full sized unit,which has everything you need to control the quadcopter, except for the video functions, which are handled by the smartphone app.

The transmitter uses the interference-free 2.4 Ghz technology, so you will be able to fly together with others.

The transmitter is mode 2 (throttle on the left); to toggle mode 1 and mode2, turn of the transmitter, then turn it on while pushing the trim button bellow the right stick to the right. It’s that simple.

The quadcopter and the transmitter bind automatically, all you have to do is turn on the X5SW first, next the transmitter with the throttle set to minimum. Next push the throttle to the top and back to the minimum again to bind them together.

To reset the X5SW’s gyros, simply move both sticks to the bottom right corner after binding, and wait for the X5SW’s LED to flash.

Binding to other transmitters is doable, but is generally not supported. The Walkera Devo line of transmitters can drive the Syma quadcopters using a hardware modification and the deviation firmware.

If your Syma X5SW has low transmitter range try to hold the trim button next to the right stick up while you are binding the quad and the transmitter.

Overall

the X5SW is a nice quadrotor to try out the basics of FPV flying, and good for taking photos. Still it’s far from perfect, and the FPV lag, low camera resolution and the wind bug clearly show that it’s a toy – even though a fairly advanced toy.
Fun:β˜…β˜…β˜…β˜…β˜†
Value:β˜…β˜…β˜…β˜…β˜†
Looks:β˜…β˜…β˜…β˜…β˜…

Resources:

For even more details on the X5SW you may wantto check out this flitetest thread and the manual on manualslib.com. The reviews on Amazon.com are very practical too.

Syma X5C Review

The Syma X5C Explorers is a well built, great looking quad for those who prefer a professional-looking quadcopter. The quad is 6-axisstabilized (3 gyros and 3 accelerometers), which grants it a smooth flight. The range is quoted as 50 meters, however you will be fly to a larger distance without losing contact (more on this later). It can fly just as high too.

The quad can do flips at a press of a button, and is very stable in the air,so you will not have to boss it around just to keep it planted.

The Syma X5C comes with prop guards and a solid plastic shell which makes it pretty well protected from crashes. It’s also said to be water resistant, but it’s better to stay safe, so keep it away from ponds and the rain. Spare props are included in the box too, depending on the seller, for example this one has them.This set comes is almost ready to fly, all you need are 4xAA batteries for the transmitter.

Weighing around 102 grams it’s not a small toy quad, which makes it ideal for outdoor flight. Fortunately indoor flying is a possibility too. Still,weighing less than 250 grams you will not have to register this quad with the FAA.

Spare parts are available, there are even pre-packaged quads with the parts included for example this nice box, which includes additional batteries, MicroSD card, and propellers. Crash sets, replacement motors and upgraded batteries are available too.

Being larger than average (the quad is 31.5×31.5×7.5 cm), it can lift quite a few grams of weight, so you can safely attach small objects to it. To lift even more, you can remove the camera. However it will not be able to lift a GoPro.

Wind resistance is good too, so small gusts will not take it away.

Indoor flight is a possibility too, though it’s a bit large for that, so leave indoor flight for later, once you are accustomed to the controls.

Being a large quad it’s a bit less nimble than it’s smaller counterparts,however it’s still wicked fast.

Being simple as it is, this quad does not support headless mode, return home function, or automatic landing. Still, being priced between 30 to 60 USD this quad is great value for the money. It has landing skids, so it will not get damaged if you happen to land it hard, and holds it’s position nicely in the air.

The box is 51.5 x 29.5 x 7.5cm and weighs 2 pounds, which is good to know if you want to take it with you on a holiday.

The quad has bright LEDs which make night flight great fun, and make daytime orientation easier too.

The video

on the quad is HD quality, that is 1280×720 pixel resolution with a 30 frame per second framerate.

The camera records to the on board microSD card which comes with the quad.The microSD card is enough for a dozen of flights, so you it’s enough even if you buy a bunch of batteries to enjoy the flying.

The quad is non-FPV, so you do not get a live video feed from it.

The video quality is as good as you can expect from such a cam. Stable, low speed flying can improve it a lot.

Audio is recorded too, some post processing is required though due to the noise from the propellers. For example Audacity is a great tool for such work.

Video recording and taking photos can be triggered from the transmitter,which is a plus compared to simple models where you have to push the buttons on the quad itself.

The videos are in AVI format, and most video player will play it without any problems. Just make sure you stop the video recording before turning off the quad and removing the microSD card for viewing, otherwise the files will get damaged.

The camera is fixed, so you will not be able to rotate it around, but is removable for improved flight performance.

The battery

is a 3.7V 500mAh LiPO one, which grants the quad a 6-9 minute flight time, (4 to 7 minutes if the camera is recording). Charge time is up to 100 minutes, so getting multiple batteries is a great idea.This pack will give your quad an even longer flight time, and includes a charger too.

The battery uses a JST plug which standard for quads nowadays, so it’s really easy to find compatible chargers.

The factory charger is USB based, so you will need an USB port for charging(iPhone wall charger works too). Just plug the battery in the charger, and the charger into the USB port and wait for the LED to turn off.

The quad has low-voltage cutoff to protect the battery: it’s LED will start blinking once the battery is getting low, and you will have a few seconds to land safely.

The transmitter

uses the interference-free 2.4 Ghz technology, so you will be able fly with other quads together. The range is50 meters, which is larger than the average. You may even find that the real range is 100 meters larger, just make sure you test it out close to the ground. If the quad goes out of range or the transmitter gets turned off it will simply drop from the air, just like the others.

The quad can be bound to other transmitters too, so you can use your own if you already have one.

Getting the quad without a transmitter is possible too.

Mode switching

is really easy: turn off the remote, pull the trim switch bellow the right stick to the right and turn on the remote.This will toggle between mode 1 and mode 2; the LCD will show the new mode.

Binding the quad and the Tx

is simple too:

  • Turn on the quad, the LEDs will start flashing.
  • Move the transmitter’s throttle to the lowest position and turn it on.
  • Move the throttle to the max position, then to the lowest again. You will hear two beeps, once when the throttle is pushed to the max, once when it’s down.
  • The Tx and the quad are now bound, you can start flying!
Overall:

Great quad for outdoor flight with above average range, and looks good too.
Fun:β˜…β˜…β˜…β˜…β˜…
Value:β˜…β˜…β˜…β˜…β˜…
Looks:β˜…β˜…β˜…β˜…β˜…


You may want to check out the Syma X5SCtoo, which is an upgraded version of the X5C. The Syma X11 is worth a look too if you prefer smaller quadcopters. RCGroups features a detailed review of the X5C too.